Guide pour faire rester des bougies coniques dans des chandeliers en laiton

Taper candles in exquisite brass candlesticks provide warmth and intimacy to any area. Nothing is more hectic than placing a lovely candle display. Taper candle holders truly spruce up a table for a special event.

But there’s one reason they’re not used more often: the candles in them are difficult to keep upright. This is a typical problem many people face, but here are simple strategies to keep your taper candles in brass candlesticks.

Select the Right Size

Size is a crucial consideration for taper candles and brass candlesticks. Taper candles are available in many sizes, and selecting the correct size for your candlestick is critical. If the taper candle is too small, it will not fit tightly in the metal candlestick and will likely fall out. If the taper candle is too large, it will not fit into the candlestick. The most common diameter for taper candles is 7/8 inch. It’s always recommended to measure the diameter of your metal candlestick and buy a candle that fits snuggly.

Use Candle Wax

Candle wax is a great way to keep taper candles in metal candlesticks. Here’s how to go about it.

  • Rub the taper candle inside the brass candlesticks where it will sit. This will result in a thin wax layer forming on the candlestick.
  • Then, in a double boiler or microwave, melt some candle wax. Use a container you are okay with getting wax on because wax can be tough to clean.
  • Once the wax has melted, coat the bottom of the taper candle.
  • Insert the candle into the brass candlesticks and hold it there until the wax hardens. This should only take a few minutes.
  • Repeat with all the taper candles you intend to use.

Candle wax is an excellent solution since it holds the taper candles in place but also acts as a hurdle between the candle and the brass candlesticks. This prevents the wax from spilling onto the metal candlestick.

Brass Candlesticks
Source : media.istockphoto.com

Wrap a Ribbon Around the Candle

Tie a ribbon around the bottom of the candle to protect it from falling out of the brass candlesticks. This results in a more significant base, which keeps the candle from slipping out of the candlestick. Here’s how to go about it.

  • Choose a ribbon that complements the brass candlesticks or matches the color of your taper candles.
  • Cut the ribbon to the desired length. It should be long enough to wrap around the bottom of the taper candle and have enough left over to tie a bow.
  • Wrap the ribbon over the candle’s bottom, ensuring it’s snug but tight.
  • Make a secure bow out of the ribbon.
  • Insert the candle into the metal candlestick and secure it with the ribbon.

This approach not only works, but it also adds a beautiful element to your candle arrangement.

Note: Remember to remove the ribbon from the candle when it is about to burn out to avoid fire.

Use of Candle Adhesive

Candle glue is a substance made to hold taper candles in place. It comes in a tube, much like glue, and is simple to apply. Here’s how to go about it.

  • Apply a little amount of candle glue to the taper candle’s bottom.
  • Make sure the candle is centered and straight in the metal candlestick.
  • Hold the candle for a few seconds until the adhesive hardens.
  • Repeat with all the taper candles you intend to use.

Candle glue is an excellent option because it is intended to hold candles in place while still being simple to remove.

Other Points to Consider

Also, keep the following in mind while working with taper candles and brass candlesticks

  • Cut the wick

Trim the wick to 14 inches before sliding the taper candle into the candlestick. This will assist in preventing the flame from becoming too large and melting and dripping onto the candlestick.

  • Maintain the candlestick’s cleanliness

Candle wax can accumulate inside it over time, making it difficult for the taper candle to fit properly. To avoid this, keep the candlestick clean. To remove any wax accumulation, use a soft cloth or a small amount of rubbing alcohol.

  • Choose the right brass candlesticks

The style of the brass candlesticks can also affect how well the taper candle stays in place. Look for candlesticks with a larger base or a narrower taper since these will support the candle. 

  • Use magnet

This is a scheme that can be reused. First, you attach a magnet to the bottom of the brass candlesticks with super glue. Then insert an iron nail into the bottom of the candle you want to use so that the candle will be fixed in the candle holder. When the candle burns out you can take out the nail and use it next time.

Conclusion

Taper candles and brass candlesticks are lovely additions to any space, but they can be inconvenient if the candles don’t remain lit. Following the above-mentioned ideas and tricks, you may address this problem while enjoying the warm, cozy environment.

Candle holders come in different shapes and sizes, and if you want to get them, you can buy them from sziqiqi.com. They have a wide range of candleholders to choose from. Visit their website and order it today!

Laisser un commentaire